MessageInfo
class provides additional ancillary information about
messages.
Received SCTP messages, returned by
SctpChannel.receive
and SctpMultiChannel.receive
,
return a MessageInfo
instance that can be queried to determine
ancillary information about the received message. Messages being sent should
use one of the createOutgoing
methods to provide ancillary data for the message being
sent, and may use the appropriate setter methods to override the default
values provided for unordered
, timeToLive
, complete
and payloadProtocolID
, before sending the message.
For out going messages the timeToLive
parameter is a time period
that the sending side SCTP stack may expire the message if it has not been
sent. This time period is an indication to the stack that the message is no
longer required to be sent after the time period expires. It is not a hard
timeout and may be influenced by whether the association supports the partial
reliability extension, RFC 3758
.
MessageInfo
instances are not safe for use by multiple concurrent
threads. If a MessageInfo is to be used by more than one thread then access
to the MessageInfo should be controlled by appropriate synchronization.
- Since:
- 1.7
-
Constructor Summary
-
Method Summary
Modifier and TypeMethodDescriptionabstract SocketAddress
address()
Returns the source socket address if the message has been received, otherwise the preferred destination of the message to be sent.abstract Association
Returns the association that the message was received on, if the message has been received, otherwise the association that the message is to be sent on.abstract int
bytes()
Returns the number of bytes read for the received message.abstract MessageInfo
complete
(boolean complete) Sets whether or not the message is complete.static MessageInfo
createOutgoing
(Association association, SocketAddress address, int streamNumber) Creates aMessageInfo
instance suitable for use when sending a message to a given association.static MessageInfo
createOutgoing
(SocketAddress address, int streamNumber) Creates aMessageInfo
instance suitable for use when sending a message.abstract boolean
Tells whether or not the message is complete.abstract boolean
Tells whether or not the message is unordered.abstract int
Returns the payload protocol Identifier.abstract MessageInfo
payloadProtocolID
(int ppid) Sets the payload protocol Identifier.abstract int
Returns the stream number that the message was received on, if the message has been received, otherwise the stream number that the message is to be sent on.abstract MessageInfo
streamNumber
(int streamNumber) Sets the stream number that the message is to be sent on.abstract long
The time period that the sending side may expire the message if it has not been sent, or0
to indicate that no timeout should occur.abstract MessageInfo
timeToLive
(long millis) Sets the time period that the sending side may expire the message if it has not been sent.abstract MessageInfo
unordered
(boolean unordered) Sets whether or not the message is unordered.
-
Constructor Details
-
MessageInfo
protected MessageInfo()Initializes a new instance of this class.
-
-
Method Details
-
createOutgoing
Creates aMessageInfo
instance suitable for use when sending a message.The returned instance will have its
unordered
value set tofalse
, itstimeToLive
value set to0
, itscomplete
value set totrue
, and itspayloadProtocolID
value set to0
. These values, if required, can be set through the appropriate setter method before sending the message.- Parameters:
address
- For a connectedSctpChannel
the address is the preferred peer address of the association to send the message to, ornull
to use the peer primary address. For anSctpMultiChannel
the address is used to determine the association, or if no association exists with a peer of that address then one is setup.streamNumber
- The stream number that the message will be sent on- Returns:
- The outgoing message info
- Throws:
IllegalArgumentException
- If the streamNumber is negative or greater than65536
-
createOutgoing
public static MessageInfo createOutgoing(Association association, SocketAddress address, int streamNumber) Creates aMessageInfo
instance suitable for use when sending a message to a given association. Typically used forSctpMultiChannel
when an association has already been setup.The returned instance will have its
unordered
value set tofalse
, itstimeToLive
value set to0
, itscomplete
value set totrue
, and itspayloadProtocolID
value set to0
. These values, if required, can be set through the appropriate setter method before sending the message.- Parameters:
association
- The association to send the message onaddress
- The preferred peer address of the association to send the message to, ornull
to use the peer primary addressstreamNumber
- The stream number that the message will be sent on.- Returns:
- The outgoing message info
- Throws:
IllegalArgumentException
- Ifassociation
isnull
, or the streamNumber is negative or greater than65536
-
address
Returns the source socket address if the message has been received, otherwise the preferred destination of the message to be sent.- Returns:
- The socket address, or
null
if this instance is to be used for sending a message and has been construced without specifying a preferred destination address
-
association
Returns the association that the message was received on, if the message has been received, otherwise the association that the message is to be sent on.- Returns:
- The association, or
null
if this instance is to be used for sending a message and has been construced using the thecreateOutgoing(SocketAddress,int)
static factory method
-
bytes
public abstract int bytes()Returns the number of bytes read for the received message.This method is only appicable for received messages, it has no meaning for messages being sent.
- Returns:
- The number of bytes read,
-1
if the channel is anSctpChannel
that has reached end-of-stream, otherwise0
-
isComplete
public abstract boolean isComplete()Tells whether or not the message is complete.For received messages
true
indicates that the message was completely received. For messages being senttrue
indicates that the message is complete,false
indicates that the message is not complete. How the send channel interprets this value depends on the value of itsSCTP_EXPLICIT_COMPLETE
socket option.- Returns:
true
if, and only if, the message is complete
-
complete
Sets whether or not the message is complete.For messages being sent
true
indicates that the message is complete,false
indicates that the message is not complete. How the send channel interprets this value depends on the value of itsSCTP_EXPLICIT_COMPLETE
socket option.- Parameters:
complete
-true
if, and only if, the message is complete- Returns:
- This MessageInfo
- See Also:
-
isUnordered
public abstract boolean isUnordered()Tells whether or not the message is unordered. For received messagestrue
indicates that the message was sent non-ordered. For messages being senttrue
requests the un-ordered delivery of the message,false
indicates that the message is ordered.- Returns:
true
if the message is unordered, otherwisefalse
-
unordered
Sets whether or not the message is unordered.- Parameters:
unordered
-true
requests the un-ordered delivery of the message,false
indicates that the message is ordered.- Returns:
- This MessageInfo
- See Also:
-
payloadProtocolID
public abstract int payloadProtocolID()Returns the payload protocol Identifier.A value indicating the type of payload protocol data being transmitted/received. This value is passed as opaque data by SCTP.
0
indicates an unspecified payload protocol identifier.- Returns:
- The Payload Protocol Identifier
-
payloadProtocolID
Sets the payload protocol Identifier.A value indicating the type of payload protocol data being transmitted. This value is passed as opaque data by SCTP.
- Parameters:
ppid
- The Payload Protocol Identifier, or0
indicate an unspecified payload protocol identifier.- Returns:
- This MessageInfo
- See Also:
-
streamNumber
public abstract int streamNumber()Returns the stream number that the message was received on, if the message has been received, otherwise the stream number that the message is to be sent on.- Returns:
- The stream number
-
streamNumber
Sets the stream number that the message is to be sent on.- Parameters:
streamNumber
- The stream number- Returns:
- This MessageInfo
- Throws:
IllegalArgumentException
- If the streamNumber is negative or greater than65536
-
timeToLive
public abstract long timeToLive()The time period that the sending side may expire the message if it has not been sent, or0
to indicate that no timeout should occur. This value is only applicable for messages being sent, it has no meaning for received messages.- Returns:
- The time period in milliseconds, or
0
-
timeToLive
Sets the time period that the sending side may expire the message if it has not been sent.- Parameters:
millis
- The time period in milliseconds, or0
to indicate that no timeout should occur- Returns:
- This MessageInfo
- See Also:
-